Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: wadeyblue on 29 November 2010, 14:44:19

Title: Locking tool cam tensioner 3.2
Post by: wadeyblue on 29 November 2010, 14:44:19

Hi All
About to replace cam tensioner kit on my 3.2 elite.
Ordered DVD from shop on how to do it, can anyone advise where I can beg, borrow or hire a locking tool which I believe I need to do the job.
I am in Fife Scotland.
Cheers in advance

Title: Re: Locking tool cam tensioner 3.2
Post by: tunnie on 29 November 2010, 14:48:44

not sure if Hotel21 has one? he is in Fife, usual rules are 250+ posts for it to be lent out as they are quite valuable.

But as your so local you maybe able to borrow it  :y

Title: Re: Locking tool cam tensioner 3.2
Post by: wadeyblue on 29 November 2010, 14:53:37

I am a bit short of 250 posts LoL

Title: Re: Locking tool cam tensioner 3.2
Post by: geoffr70 on 29 November 2010, 15:02:54

Sorry to hijack this, does anybody know if AST locking tools are any good? (AST 4145)

Thanks

Title: Re: Locking tool cam tensioner 3.2
Post by: feeutfo on 29 November 2010, 18:16:59

Yes,AST very good kit IMO. Fits very well. But new are very expensive it seems to me, if you can get a used one off gay bay or similar....?

Title: Re: Locking tool cam tensioner 3.2
Post by: geoffr70 on 29 November 2010, 20:15:36

Thanks chrisgixxer! I'm thinking about getting a set and have heard of these but wasn't sure as it's not GM. Thanks