Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Andyb on 02 December 2010, 18:18:39

Title: PAS
Post by: Andyb on 02 December 2010, 18:18:39

just a quickie ladies and gents

pas is now not working at idle only at aprox 3000rpm..
would you say this is the pump or somthing else
belt fine so i am guessing its the pump just wanted to check before placing add in wanted section
Andy

Title: Re: PAS
Post by: waspy on 02 December 2010, 18:26:57

Have you checked the fluid level?

Title: Re: PAS
Post by: Andyb on 02 December 2010, 20:28:04

yea had to top it up by about half a cup full thats it

Title: Re: PAS
Post by: Andy B on 02 December 2010, 20:48:32

Quote

yea had to top it up by about half a cup full thats it

'new' pump required!  ;) ;)

Title: Re: PAS
Post by: Andyb on 02 December 2010, 20:49:59

is it worth a new pump or used ???

Title: Re: PAS
Post by: Andy B on 02 December 2010, 20:56:52

Quote

is it worth a new pump or used ???

Definitely a new to you pump, apparently a brand new pump is slightly different for which you'd need new slightly different pipework somewhere, and I bet they're bloody expensive.