Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: mrjimbo on 04 December 2010, 00:04:09

Title: Tailgate lock barrel
Post by: mrjimbo on 04 December 2010, 00:04:09
How does the tailgate lock barrel come out ? do you have to remove the complete number plate light and the whole lock assembly or is it a bit easier than that ?
Title: Re: Tailgate lock barrel
Post by: Kneepad on 04 December 2010, 00:13:19


Remove trim panel, disconnect central locking linkage, undo nuts then unhook the cylinder assembly.   :y
Title: Re: Tailgate lock barrel
Post by: mrjimbo on 04 December 2010, 00:22:15
So it comes out from inside the tailgate then, wasn't sure if i needed to remove the numberplate light/handle assembly   :y
Title: Re: Tailgate lock barrel
Post by: Brikhead on 04 December 2010, 09:42:42
Quote
So it comes out from inside the tailgate then....

It makes it harder for the thieves to get in! :y
Title: Re: Tailgate lock barrel
Post by: Kneepad on 04 December 2010, 14:26:04


    :y
Title: Re: Tailgate lock barrel
Post by: mrjimbo on 07 December 2010, 13:19:30
Can the barrel be stripped down and reconfigured to suit a different key or do you need to get another barrel to suit the key ?
Title: Re: Tailgate lock barrel
Post by: zirk on 07 December 2010, 14:18:15
Quote
Can the barrel be stripped down and reconfigured to suit a different key or do you need to get another barrel to suit the key ?

The levers will be different, ie fitted by lever number and sequence to each key, so no, best to source an auto locksmith place if you want to retain the same key.

Chris.
Title: Re: Tailgate lock barrel
Post by: mrjimbo on 07 December 2010, 19:09:21
OK we'll forget that idea then   ;D