Omega Owners Forum
		Omega Help Area => Omega General Help => Topic started by: I_want_an_Omega on 22 December 2010, 16:52:11
		
			
			- 
				Anyone know how to remove the accelerator pedal assy complete from a MFL V6, I'm guessing that there is a bit that's bolted  to the bulkhead and then the cable that runs through to the engine bay?
Thanks
			 
			
			- 
				
I'm guessing that there is a bit that's bolted  to the bulkhead and then the cable that runs through to the engine bay?
Thats pretty much it, yes, undo the nuts from inside the car.
			 
			
			- 
				Will the whole cable pull back inside the cabin, or does it have to be disconnected and pulled through into the engine bay?
Thanks
			 
			
			- 
				IIRC, Disconnect the cable from the pedal, and then just pull on the cable under the bonnet and it should come through.
If its an automatic, there will be a kick down switch that needs unplugging (under the bonnet where the cable goes into the car)