Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: zuluf on 17 January 2011, 20:51:11
-
I can swear I saw some guides or at least some pointers on how to do it on the forums but apparently I cant find it anymore.
I would kindly ask if anyone knows to point me/give link to "How To" for retrofiting CC on Omega B '97.
Thank you!
-
This one?.....
http://www.omegaowners.com/forum/YaBB.pl?num=1166374649 :y
-
Try these:
http://www.omegaowners.com/forum/YaBB.pl?num=1197646817
http://www.omegaowners.com/forum/YaBB.pl?num=1152953478
http://www.omegaowners.com/forum/YaBB.pl?num=1166374649
-
Yes, those! Thanks guys for help.
Now after running through them I got dissapointed a bit. A lot more work than I imagined in the first place (or at least as I remember it when I first read it)
Anyhow, will give it a thought. Thanks again.
-
Yes, those! Thanks guys for help.
Now after running through them I got dissapointed a bit. A lot more work than I imagined in the first place (or at least as I remember it when I first read it)
Anyhow, will give it a thought. Thanks again.
you need the loom for cruise module on the driver's side suspension turret.
-
Main problem with 2.0 & Cruise Control, is finding the cruise cable bracket for the cam cover. Only 2.0 CDX had them, which here in the UK were not that common.
-
Is it possible to Frankenstein-ize something from v6 model?
edit: Or frankie something of a facelift 2.2 model? TBH I don't get all the pieces how CC's supposed to work on my model.
-
iirc, the 2.0 had a longer cable than any other.
Hard to find.
iirc vectra ones are compatable should you find one.
-
V6, nope totally different plenum mount, 2.2 has an electronic throttle body so no cables, its going to be tough to find, check eBay for ones being broken :y
-
...well, I think I'll put it on my "lets do it when you have time/money or you bump into something that you need" list.
If anyone has some more ideas don't restrain yourself :P
Anyhow, thanks for help guys!