Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: mark.adams on 24 January 2011, 08:36:59

Title: Part No. & Assistance Please
Post by: mark.adams on 24 January 2011, 08:36:59
1. Does anyone have the part number for the heater matrix for a facelift 2.2 CD with Air Con
2. I don't really fancy fitting said part, would anyone be interested in doing it, paid obviously....
Title: Re: Part No. & Assistance Please
Post by: Boditza on 24 January 2011, 08:48:42
i think this is it: 90487635 .. you can pm your vim and i will tell you for sure what part number it is :)
Title: Re: Part No. & Assistance Please
Post by: andyc on 24 January 2011, 09:04:03
Thats the old pre face lift part number which is NLS and has been superseeded to 9194851

facelift part Number is 9194851 @ £117.98 + VAT trade. This is for "Y" chassis onwards

if its a pre or mini facelift car, upto X1999999 then you wil also need to repalce the pipe work to the matrix

Andy

Title: Re: Part No. & Assistance Please
Post by: RobG on 24 January 2011, 09:06:46
Part # 72655 from here £17.00
http://www.buypartsby.co.uk/radiators-final.php?year=1994&Submit=Next&make=Vauxhall&model=Omega&sub=&eng=2.0000
Title: Re: Part No. & Assistance Please
Post by: Boditza on 24 January 2011, 09:34:19
my bad then :)
Title: Re: Part No. & Assistance Please
Post by: mark.adams on 24 January 2011, 10:12:39
Thank you one and all.
Any takers for fitting the damn part??
Title: Re: Part No. & Assistance Please
Post by: Welung666 on 24 January 2011, 11:54:25
Are you sure it's the matrix? Could it be the seals where the pipes enter?
Title: Re: Part No. & Assistance Please
Post by: mark.adams on 24 January 2011, 13:47:04
Lee,
It's not a leak, it's poor water flow after radweld.
I can flush it and it gets slightly better for a little while but i think the matrix needs replacing ideally, i tried forcing caustic soda through it too but the heat transfer is rubbish, pipes in and out are lovely and hot, no air locks, heat gets slightly better with high revs.
Water level fine, no leaks anywhere.
What do you think?