Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: 3.2 paisley wagon on 01 February 2011, 13:36:36

Title: vacuum gauge connection point
Post by: 3.2 paisley wagon on 01 February 2011, 13:36:36

Hi can anybody advise me where on my car to connect the 4mm airline coming from the vacuum gauge i have just bought??  Gauge diagram mentions the vacuum pipe on the air intake. :-?

Title: Re: vacuum gauge connection point
Post by: Marks DTM Calib on 01 February 2011, 13:37:53

Given its a 3.2, the feed to the vac reservoir on the front inlet bagpipes

Title: Re: vacuum gauge connection point
Post by: 3.2 paisley wagon on 01 February 2011, 13:39:22

bagpipes?

Title: Re: vacuum gauge connection point
Post by: 3.2 paisley wagon on 01 February 2011, 13:41:48

mark, are you refering to the small thin plastic pipe going from a t-piece off the brake servo to the multiram?

Title: Re: vacuum gauge connection point
Post by: Marks DTM Calib on 01 February 2011, 15:32:50

Yes although it should be going from a T-piece off the brake servo pipe to a vac tank on the base of the inlet bagpipes near the crank pulley (on which is mounted the front multiram).

Title: Re: vacuum gauge connection point
Post by: 3.2 paisley wagon on 01 February 2011, 20:46:04

Got you now mark the black box at the bottom of the bagpipes with the two small vacuum pipes.  Thanks