Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: bigtoby on 02 February 2011, 10:38:23
-
hi there i have a 1997 3.0 v6 elite does anybody know wot temperature the cooling fan should cut in is plz
thx for help
-
Think it was around 95-96 degrees but not sure
-
really seems a bit high might explain why my fan not cutting in then but thought it cut in around 92 degrees was gonna put a manual switch inside the car dont really like it getting much hotter than 90 degrees really thx for ur help
-
really seems a bit high might explain why my fan not cutting in then but thought it cut in around 92 degrees was gonna put a manual switch inside the car dont really like it getting much hotter than 90 degrees really thx for you are help
90 is far too low. Fans cut in around 97
you have 3 fans on your car. ;)
-
4 pots fan cuts in at around 92, the V6 runs a bit hotter & as Andy says starts cooling at 95-97 :y