Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: lorenzolen on 26 February 2011, 13:56:12

Title: Seat hieght adjustment on a face lift
Post by: lorenzolen on 26 February 2011, 13:56:12

Hi all just a question regarding electric seat height adjustment can the motors be changed as mine seams to have stripped the the thread on the worm drive that moves the seat up and down, regards L

Title: Re: Seat hieght adjustment on a face lift
Post by: sandune on 26 February 2011, 14:06:45

Are you positive the threads are striped? Or the seat have reached it's limit. :D

Title: Re: Seat hieght adjustment on a face lift
Post by: lorenzolen on 26 February 2011, 14:49:32

Hi the motor  turns but no movement at all .L

Title: Re: Seat hieght adjustment on a face lift
Post by: sandune on 26 February 2011, 15:19:36

Hi there is a "how to" to re-adjust the winder using a 10m socket on a suitable length bar and wind on the adjuster.
Looking under the seat at the rear ,remove the plastic cover at the end and wind the worm feed in to it's full run then try the motor. :y