Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: kjf7 on 27 February 2011, 21:53:17
-
is there a common reason as to why this would be on on a mv6 3.2 auto 2001 model if so is it likly to be expensive or quite an easy fix thanks all who have helped during my weekend of need although its not over yet! :y
-
Need to read codes - look up pedal trick on here. Wouldn't mind betting your get either P0420 or P0430 or both.
-
ok what would they mean as havnt bought the car yet a mates got a tech 2 but the cars 100 miles away :y
-
If you get those codes, it will be failing pre-cats. Nothing to worry about, plenty of information on here.
-
ok what would they mean as havnt bought the car yet a mates got a tech 2 but the cars 100 miles away :y
I assume you mean what does the EML Light mean? They let you know there is a problem. As too what the problem is you need to do the Pedal Trick or plug a Tech2 or Code Reader in ..
-
heres the ebay no 130485496214 i know this probably wont help but just need an idea as i need a car quick i waas wondering what those codes might mean that matey was betting on as a starting point good to see you mr darth i need your help
-
Not sure about the V6 lump, but when mine came on on my 2ltr it was because the Cam Sensor had packed up. Best to get it checked with fault codes though. On a straight 4 lump it was very straight forward to change.
-
Hi what r the main problems I need to look for before I buy this mv6 3.2 2001 y reg cheers and thanks again everyone :y
-
There are masses of reasons that the EML will come on - basically anything that is controlled or sensed by the ECU.
The ECU will check many many functions when you start the engine, and any one of those could bring the light on.
So, to avoid any doubt you NEED to do the pedal trick or get the codes read properly.
HTH