Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: rajveer.sandhu on 19 March 2011, 21:34:19

Title: lowering car - elite
Post by: rajveer.sandhu on 19 March 2011, 21:34:19

is there a way of using the self levelling suspension pump to lower my elite facelift?
is there a guide for this?

Title: Re: lowering car - elite
Post by: millwall on 19 March 2011, 22:13:34

i thought the self leveling was only on the rear 

Title: Re: lowering car - elite
Post by: rajveer.sandhu on 19 March 2011, 23:31:52

Sorry, should have said that the front sits fine, the rear is a little too high, so I would want the rear to be lowered only.

Title: Re: lowering car - elite
Post by: tidla on 19 March 2011, 23:35:47

"adjust" the self leveling link to height that suits.

Title: Re: lowering car - elite
Post by: feeutfo on 20 March 2011, 00:44:28

Yes there is a guide for testing. Follow this to see how low the car drops and how low the springs fitted will allow. Then you will have to find a way to shorten the link arm to achieve a hight just above that, so the pump still self tests on start up.

But note it will only drop as low as the springs allow.

It's supposed to be possible to set it via tech 2, but the ecu would not communicate when we tried it.  :-/