Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Road Hog Mad on 20 March 2011, 17:15:09

Title: Gear Selector Light
Post by: Road Hog Mad on 20 March 2011, 17:15:09
When you move from P to D the light remains on P, I have swapped the PRND321 for one that I know works, still have the same problem, any ideas?
Title: Re: Gear Selector Light
Post by: ffcgary1 on 20 March 2011, 17:18:02
Is this for an omega or your rover?
Title: Re: Gear Selector Light
Post by: Road Hog Mad on 20 March 2011, 17:29:04
Omega 2.5 TD R Reg. :D
Title: Re: Gear Selector Light
Post by: robg1984 on 20 March 2011, 18:11:03
Did you set it up the way the maintenence guide ;) says as it only has to be out a fraction for it not to work properly
Title: Re: Gear Selector Light
Post by: Road Hog Mad on 20 March 2011, 18:46:16
Not seen any maintenance guide for this!?
Title: Re: Gear Selector Light
Post by: Road Hog Mad on 20 March 2011, 19:28:45
You are not allowed to access this section.
Title: Re: Gear Selector Light
Post by: Andy H on 20 March 2011, 19:38:02
Which section  :-/

Have you tried the maintenance guide? Auto gearbox selector switch removal and cleaning (http://www.omegaowners.com/forum/YaBB.pl?num=1267956397)
Title: Re: Gear Selector Light
Post by: robg1984 on 20 March 2011, 19:38:47
its this link http://www.omegaowners.com/forum/YaBB.pl?num=1267956397 i know it says for cleaning but it also shows you how get the switch in he right position for refitting its a right pain if you dont get it in the right place i was having trouble getting into park when i fitted a gearbox the other week and it was because the selector switch was marginally out of place :y
Title: Re: Gear Selector Light
Post by: Road Hog Mad on 20 March 2011, 19:40:22
All of that for it to light up that i'm in D, god! lol
Title: Re: Gear Selector Light
Post by: Andy H on 20 March 2011, 19:47:47
Quote
All of that for it to light up that i'm in D, god! lol
The switch tells the gearbox ECU what you have selected.

The ECU turns the lights on.