Omega Owners Forum
		Omega Help Area => Omega General Help => Topic started by: tango on 21 March 2011, 15:12:21
		
			
			- 
				hi 
 quick question guys
 car was running fine
 i put some coolant flush in it so i can clean it before putting in some new red stuff
 however as per guide of flush
 i put the flush in and had to run it for ten or so minutes
 so i started it and had it sitting on the drive
 about five minutes in the car cut of itself and now when i start it it starts but the spanner light is on also the tc light is on
 its running smoothbut  its idling at around 900 and when you rev it the engine seems to have a delay in picking up and dropping the revs in comparison to the pedal
 any ideas please
 thanks in advance
- 
				do the pedal trick and post up the codes  :y
			
- 
				ok got these codes
 0120
 0220
 1110
 1613
 1700
 the tc light has disapeared but the spanner light is still on with the revs still playing up
 thanks in advance guys