Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: baldthreads on 26 March 2011, 10:31:12
-
I am trying to find out as much as possable adout A omega 2.2 dti engine wiring as ill be fitting it into a classic car! The engine mountings and sump i would get round.
but what about the wiring could it be done.
is the engine wiring loom separate to main car ?
alarm?
what would be the basic wiring needed from the omega?
-
any help at all would be great
-
Engine wiring loom will be pluggable into car loom by battery as with most Vauxhalls.
-
it's quite dificult to make out what you need from your post - is English your first language ?
anyway, the engine wiring must be transferred completely, together with the code-reading whatsit around the ignition switch. From memory, the Frontera Haynes manual has a 2.2DTi wiring diagram, which you should copy and blow up. You'll thenbe able to replicate a loom for your car, and prioritise the feeds that you need.
At start-up, the engine ECU waits for a "handshake" signal to come from the key reader before it'll allow the engine to start. No code = no starty
-
id have to use the omega key and ignition.
i cant do away with the code-reading.
what about the alarm how would get around this.
-
no issues with the alarm, it's not connected to the immobiliser
-
do the wires from the code-reading around the ignition switch go straght to the engine ecu?
-
yes, I think so.
but I need to check it on hte diagram first.
-
(thanks for the help )dose anyone have wiring diagrams for the engine etc