Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: sotmh on 04 April 2011, 13:52:28

Title: injector removal help required.
Post by: sotmh on 04 April 2011, 13:52:28

I've been able to remove connectors, but removing injectors are proving difficult, also inlet manifold support bracket.  Have removed one bolt but was wondering if there were others.  If there are I will need to jacyk up to gain access unless anyone knows different.  Assistance please

Title: Re: injector removal help required.
Post by: PhilRich on 04 April 2011, 15:19:50

Inlet manifold bracket bolts to the base of the engine block & needs to be undone from underneath the car. The Injectors are just a push fit on 'o' rings & should come out with the Injector rail afaik :-/

Title: Re: injector removal help required.
Post by: sotmh on 04 April 2011, 15:59:05

thanks Phil. :y

Title: Re: injector removal help required.
Post by: sotmh on 04 April 2011, 19:18:37

Unless I'm doing something realy unfathomably ridiculous I still can't remove injectors.

They are able to turn whilst still connected to injector assembly and within the exhaust manifold.

injector connectors are removed also the clips.  Am I doing something wrong :question

Title: Re: injector removal help required.
Post by: PhilRich on 04 April 2011, 19:32:27

Hi sotmh, i've sent you a PM  :y

Title: Re: injector removal help required.
Post by: sotmh on 05 April 2011, 13:03:46

PM SENT