Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: tango on 11 April 2011, 16:53:27
-
hi to all
any body know why i should be getting these codes
0008
056008
had a call from someone whos having some issues with the mig
secondly he said he starts the car and and it runs fine but once the car is warm it cuts of itself and refuses to start until it has cooled down
any ideas
thanks in advance
-
hi to all
any body know why i should be getting these codes
0008
056008
had a call from someone whos having some issues with the mig
secondly he said he starts the car and and it runs fine but once the car is warm it cuts of itself and refuses to start until it has cooled down
any ideas
thanks in advance
Not sure on the codes but the cutting out seems to be similar to crank sensor failing. Is it petrol or diesel :question
-
Codes are rubbish, grab them again :y
-
thats all ive been given
i think its supposed to 0560
-
hi to all
any body know why i should be getting these codes
0008
056008
had a call from someone whos having some issues with the mig
secondly he said he starts the car and and it runs fine but once the car is warm it cuts of itself and refuses to start until it has cooled down
any ideas
thanks in advance
Not sure on the codes but the cutting out seems to be similar to crank sensor failing. Is it petrol or diesel :question
its a 2.6 petrol
is the crank sensor the one by the oil filter
-
hi to all
any body know why i should be getting these codes
0008
056008
had a call from someone whos having some issues with the mig
secondly he said he starts the car and and it runs fine but once the car is warm it cuts of itself and refuses to start until it has cooled down
any ideas
thanks in advance
Not sure on the codes but the cutting out seems to be similar to crank sensor failing. Is it petrol or diesel :question
its a 2.6 petrol
is the crank sensor the one by the oil filter
Yep
-
......
its a 2.6 petrol
is the crank sensor the one by the oil filter
yes. ;) :y
-
thanks for the replies but without getting to technical why would it cut out when warm
-
It's the cs cable next to the oil lines and other heat sources that cause the agro apparently.
Preferably confirmed with an 0335 (?) code via pedal trick first though. Not always present sadly... :-/
-
had a problem with thion the g/fs clit, once heated up, if switched of, would crank but not start, replaced both the coolant temp sensor and flywheel sensor for £40 job done, not had trouble with it since.