Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: rob in gib on 13 April 2011, 19:03:01

Title: Quick EML question
Post by: rob in gib on 13 April 2011, 19:03:01

Hi All
have just fitted new coil pack and solved the misfire.
Yes she runs lovely and smooth again.
Question is the eml is still on did i read somewhere that this should reset after x number of starts ?
and how many starts to clear?
thanks in advance

Rob

Title: Re: Quick EML question
Post by: TheBoy on 13 April 2011, 19:05:09

Depends on the codes. I notice that trim codes don't clear when fault is cleared on DBW engines...

Title: Re: Quick EML question
Post by: rob in gib on 13 April 2011, 19:09:25

Quote

Depends on the codes. I notice that trim codes don't clear when fault is cleared on DBW engines...

The codes were 0300 and 0306 so random misfire and misfire cyl6

Not suprised when i saw the condition of the coil pack TBH

Title: Re: Quick EML question
Post by: TheBoy on 13 April 2011, 19:11:19

Are those the only remianing codes now (check again)?

Title: Re: Quick EML question
Post by: rob in gib on 13 April 2011, 19:13:14

Quote

Are those the only remianing codes now (check again)?

Ok will check and let you know

Cheers

Title: Re: Quick EML question
Post by: rob in gib on 13 April 2011, 19:27:41

Ok codes now showing
0300
0306
0120
0220
the last 2 are down to forgetting to re connect the throttle motor multi plug (i know silly error)

however the EML light is now going out so all good
but how long will the codes be stored in the memory?

Thanks

Title: Re: Quick EML question
Post by: TheBoy on 13 April 2011, 19:37:16

Light out = good :y

Drive it around for a couple of weeks, then check again :y

Title: Re: Quick EML question
Post by: rob in gib on 13 April 2011, 19:42:04

Quote

Light out = good :y

Drive it around for a couple of weeks, then check again :y

Will do

and Thanks again TB