Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: tony2 on 09 April 2011, 22:08:42
-
hi just won above have to take out of doner car myself have i got any problems to refit into mine ie wiring or any other problems, any thing i should make shure i get frome doner car that i will need thats not in cdx model cheers tony
-
IIRC you will need an extra live or it could be two i'm not sure and an earth to make the electrical adjustment work in your car oh and make sure you get the torx bolts from the Elite as they are longer ;)
-
thanks pete for quick reply the longer torx bolts are these the ones that secures the seats into the floor in the runners cheers tony
-
thanks pete for quick reply the longer torx bolts are these the ones that secures the seats into the floor in the runners cheers tony
Yep
-
New bolts are pence from vx. :y
-
Sorry if I'm teaching you to suck eggs but remember to disconnect the battery on the donor car before commencing seat removal. :-[
-
Sorry if I'm teaching you to suck eggs but remember to disconnect the battery on the donor car before commencing seat removal. :-[
Bear in mind that the Elite seat will need power on to move back & forward to access the bolts that bolt it down.
-
hi h j dad no problem car as just arrived at breakers still intact will be removing seats tomorrow will check battery another question where are the rear heated switches situated have removed my rear seats today and found 2 conectors unerneath 1 male fitting 1 female take it these are fore the heated seats tony
-
Sorry if I'm teaching you to suck eggs but remember to disconnect the battery on the donor car before commencing seat removal. :-[
Bear in mind that the Elite seat will need power on to move back & forward to access the bolts that bolt it down.
I was thinking about side airbags but yes they will need to be moved back and forth unless you are an absolute genius dwarf that is unbelievably flexible :y
-
hi h j dad no problem car as just arrived at breakers still intact will be removing seats tomorrow will check battery another question where are the rear heated switches situated have removed my rear seats today and found 2 conectors unerneath 1 male fitting 1 female take it these are fore the heated seats tony
you're going to hand winding these seat for a looooong time then - you'll need something to wind them with.
rear seat heater switches are either side of the rear ciggy lighter. There are also some relays clipped to the front edge of where the rear base sits, you'll need them too.
-
hi h j dad no problem car as just arrived at breakers still intact will be removing seats tomorrow will check battery another question where are the rear heated switches situated have removed my rear seats today and found 2 conectors unerneath 1 male fitting 1 female take it these are fore the heated seats tony
Rear cigarette lighter has a pair of buttons that operate the seat heater,you will need to remove this as well to go into your car.
-
.....
I was thinking about side airbags .....
;) I know. :y
-
^ Fiddle sticks too slow :
-
hi will a power pack connected to battery leads give power to seat swiches just to move seats then disconnect before unpluging connectors
-
hi will a power pack connected to battery leads give power to seat swiches just to move seats then disconnect before unpluging connectors
yes, but they can be manually moved via a small square drive under the seat.
-
thanks andy b will let every one know how things go tony
-
hi h j dad no problem car as just arrived at breakers still intact will be removing seats tomorrow will check battery another question where are the rear heated switches situated have removed my rear seats today and found 2 conectors unerneath 1 male fitting 1 female take it these are fore the heated seats tony
you're going to hand winding these seat for a looooong time then - you'll need something to wind them with.
rear seat heater switches are either side of the rear ciggy lighter. There are also some relays clipped to the front edge of where the rear base sits, you'll need them too.
I made a tool that goes my battery drill, doesn't take long then ;)
-
hi every one just a update have finally got seats and fitted today ;D but have a fault :-[ rear seats and passengerseat working fine even the heated part , drivers seat no heat also back rest and the up and down works fine but no forward or rear movement i can hear the relay clicking , have tried to set memory but no avail any ideas please tony
-
Drivers seat heat pads are a known to fail,it is possible to replace the heating element but it is a little time consuming and does require a degree of patience and skill.
-
hi further update every thing except the heating on drivers seat now working which i can live with best £50 ever spent mig now looks smart with leather interior thanks every one for all the tips tony