Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: albitz on 18 April 2011, 18:34:53

Title: Self levelling - need engine running ?
Post by: albitz on 18 April 2011, 18:34:53

As above - does the engine need to be running for the self levelling to work, or should it operate (by manually moving the sensor arm) with just the ignition on ?

Title: Re: Self levelling - need engine running ?
Post by: Kevin Wood on 18 April 2011, 18:58:32

Should only need the ignition on as far as I can see.

Kevin

Title: Re: Self levelling - need engine running ?
Post by: henryd on 18 April 2011, 19:02:53

Mine works with just the ignition on,I was playing with it a couple of weeks ago when I replaced the shocks :y

Title: Re: Self levelling - need engine running ?
Post by: The Red Baron on 18 April 2011, 19:15:22

Quote

As above - does the engine need to be running for the self levelling to work, or should it operate (by manually moving the sensor arm) with just the ignition on ?

just the ignition.  :y

Title: Re: Self levelling - need engine running ?
Post by: albitz on 18 April 2011, 19:37:35

Thanks all, will have a play tomorrow. :y

Title: Re: Self levelling - need engine running ?
Post by: danzigfan on 18 April 2011, 19:50:48

Just ignition. I know, because "check" due to self levelling not working appears before starting engine :'(

Title: Re: Self levelling - need engine running ?
Post by: amba on 18 April 2011, 20:57:45

Sorry to hijack this,but curious to know if you can make much difference to the ride height by altering the arms position on the rear sensor...