Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: joff on 05 May 2011, 11:04:17

Title: code issue
Post by: joff on 05 May 2011, 11:04:17

Looked at another mig yesterday, it had a few codes in it but the one that is getting me is 0650, Malfunction indicator (Ml)control circuit high/low/open instrument. The other two were the normal 0430 and 0420 and we know what they are. but what does 0650 mean :question

Title: Re: code issue
Post by: Kevin Wood on 05 May 2011, 11:10:52

Malfunction indicator is the engine management light. It has detected that it is open or short circuit at some point.

Do both the engine management light (car with spanner) and emissions light (picture of engine) light up when you turn on the ignition?

Could be someone has removed the bulb to hide the 0420 and 0430?

Kevin

Title: Re: code issue
Post by: joff on 05 May 2011, 11:17:27

just the emissions light is on when engine running. I know the bulb is in the eml as i did the pedle trick to get the codes. :-?

Title: Re: code issue
Post by: TheBoy on 05 May 2011, 11:37:12

wouldnt be too concerned about that - possibly the bulb has been out/blown/ign on with dash out in the past

Title: Re: code issue
Post by: joff on 05 May 2011, 11:40:26

thanks Kevin and Jamie, just thinking of striping said car anyway