Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: spaceprobe on 22 May 2011, 21:50:54

Title: engine code help please...
Post by: spaceprobe on 22 May 2011, 21:50:54
Hi all,
I used a paper clip to read the engine codes on my 2.5 v6.

I get the initial 212121
then 59 (three times)
then 31 (three times)
then it repeats with 212121 etc

Does this mean my codes are simply 59 (Intake Manifold Valve 1 Voltage Low) and 31 (No Engine RPM Signal).

If so, does anyone have any ideas as to why these would show up.

I recently changed the rocker cover gaskets and, as I'm sure you all know, I had to disconnect about a hundred wires and pipes. Do you think I missed some when reconnecting?

Does any one know where to start looking?

Thanks for any help.

S.
Title: Re: engine code help please...
Post by: RobG on 22 May 2011, 21:55:09
Make sure the rear multi-ram connector is firmly plugged in
Title: Re: engine code help please...
Post by: henryd on 22 May 2011, 22:13:09
ignore the 31,you always get that when the engine is'nt running :y
Title: Re: engine code help please...
Post by: spaceprobe on 24 May 2011, 09:33:32
Great. Thanks for you help, guys. I'll unplug and replug everything I can find.

S.