Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Field Marshal Dr. Opti on 05 June 2011, 14:50:03

Title: Alarm disconnection?
Post by: Field Marshal Dr. Opti on 05 June 2011, 14:50:03

Which wires do I snip/disconnect to silence the alarm on my 53 plate MV6 for good?.

It keeps going of when I start up and drive away. Embarrassing.  :-[ :-[


I want it dead......Forever.. >:( 

Title: Re: Alarm disconnection?
Post by: RobG on 05 June 2011, 14:51:29

Powersounder or alarm horn?

Title: Re: Alarm disconnection?
Post by: Jimbob on 05 June 2011, 14:51:59

are you opening it with the key?

if you use the remote that stops the alarm.

If it only happens when driving....thats a fault, and could well be the source of many omega fires - the powersounder.

Title: Re: Alarm disconnection?
Post by: Jimbob on 05 June 2011, 14:53:30

ohhh, and did you ever buy a code reader?

if so, you may be able to see the alarm log.

Title: Re: Alarm disconnection?
Post by: Field Marshal Dr. Opti on 05 June 2011, 15:03:46

Quote

Powersounder or alarm horn?

This one today (I think)......but the powersounder has been a noisy little turd in the past.

I have a pair of pliers at the ready. Just tell me where to snip. :y

Title: Re: Alarm disconnection?
Post by: Field Marshal Dr. Opti on 05 June 2011, 15:05:34

Quote

are you opening it with the key?

if you use the remote that stops the alarm.

If it only happens when driving....thats a fault, and could well be the source of many omega fires - the powersounder.

No... :y

Title: Re: Alarm disconnection?
Post by: Field Marshal Dr. Opti on 05 June 2011, 15:07:37

Quote

ohhh, and did you ever buy a code reader?

if so, you may be able to see the alarm log.

Nope......a camcorder. This is piss poor at reading Omega codes... :-/ :-/

Title: Re: Alarm disconnection?
Post by: Andy B on 05 June 2011, 15:57:59

Leave your snips in your tool box & disconnect the power sounder ....... go from there.  :y :y