Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: plym ian on 07 June 2011, 08:07:58

Title: torque setting for poly bushes
Post by: plym ian on 07 June 2011, 08:07:58

Doing my wishbone and roll bar poly bushes tomorrow just don't know the torque they should be. Cheers Ian :y

Title: Re: torque setting for poly bushes
Post by: RobG on 07 June 2011, 08:15:49

Anti-roll bar drop link = 65Nm

Wishbones pivot bolts
Stage 1 = 120 Nm
Stage 2 = Angle tighten 30deg
stage 3 = Angle tighten 15deg

balljoint to arm 35Nm
balljoint to knuckle - 100Nm