Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: raywilb on 16 June 2011, 16:04:19
-
does anybody on the oof know where i can get a "door hinge pin" removal tool. that will do the job. i intend trying remove & swap my rear doors on the mig. never attempted the job before.
-
Flat bladed screwdriver, failing that, a flat bladed screwdriver with a notch cut in the centre of the blade. seemples.
A little tip, disconnect multi-plug behind rubber grommet at base of pillar, undo checkstrap, then close the door before knocking pins out
-
Or if (as they often are) they prove stubborn...pair of mole grips and whack them with a hammer (the mole grips, not the pins)...
To access the pins, open the front doors...you can get to them easier than access with the back doors open :y
-
cheers lads, intend to try tomorrow. :y :y
-
Or if all else fails break out the grinder
(http://i167.photobucket.com/albums/u134/jdbefc/013.jpg)
-
Or if all else fails break out the grinder
You selling that mate ? A bit of Isopon and it'll be good as new ;D ;D ;D ;D ;D ;)
-
Or if all else fails break out the grinder
You selling that mate ? A bit of Isopon and it'll be good as new ;D ;D ;D ;D ;D ;)
Gave it to the " any old ironnnnn" man the other day, sorry mate ;D
-
Grinder it is then :y ;D ;D ;D