Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Olympia5776 on 24 June 2011, 19:28:04

Title: Door card trims
Post by: Olympia5776 on 24 June 2011, 19:28:04

Are the door card "wood " trims removable from a FL and if so how are they held on ?

Title: Re: Door card trims
Post by: SJKOO01 on 24 June 2011, 19:45:45

There plastic riveted on. 

First carefully drill down the holes of the rivets, making sure you don't drill too far (about 3 to 5mm), then drill the head off the rivets, then you can remove them.

Use a self tap screw with a washer to replace them.

 :y

Title: Re: Door card trims
Post by: blackviper90210 on 24 June 2011, 20:22:44

I used a flat blade screwdriver and gently prised them out. If your careful enough, you can just push fit them back in again!  :y

I only know as I did that to my old Elite and re sprayed them silver along with the rest of the "wood" trim

HTH

Title: Re: Door card trims
Post by: Olympia5776 on 24 June 2011, 22:02:27

Thanks all. :y