Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Andy1766 on 24 June 2011, 19:29:34

Title: New crank sensor
Post by: Andy1766 on 24 June 2011, 19:29:34

Hi I have just put a new crank sensor on my car, put everything back together and then tried to start the car, she starts runs for 10 seconds then stops tried to start her about 5 times with the same results. Any help please?
 :(

Title: Re: New crank sensor
Post by: Brikhead on 24 June 2011, 20:11:27

Quote

Hi I have just put a new crank sensor on my car, put everything back together and then tried to start the car, she starts runs for 10 seconds then stops tried to start her about 5 times with the same results. Any help please?
 :(

Is that what it was doing before you changed the sensor?
Why did you change it?

Title: Re: New crank sensor
Post by: Andy1766 on 24 June 2011, 20:15:27

It was changed due to a code 19? And the engine light stayed on, and it was cutting out when hot.

Title: Re: New crank sensor
Post by: Brikhead on 24 June 2011, 20:40:27

Did you use a genuine sensor?

Title: Re: New crank sensor
Post by: Andy1766 on 24 June 2011, 20:44:07

Yes I did

Title: Re: New crank sensor
Post by: Jimbob on 24 June 2011, 20:48:32

do you have any extra codes?

also, just cos a sensor is new, does not mean it is working.

Title: Re: New crank sensor
Post by: trainmanone on 24 June 2011, 21:16:57

is it the same part number?? only asking because i had same problem a few years back with a 2,0 l ,use engine number not chassie  number .... had three different ones fitted. ::) ::)

Title: Re: New crank sensor
Post by: Andy1766 on 24 June 2011, 21:38:10

Yes it's the same part number, took the old one off first number was on it.

Title: Re: New crank sensor
Post by: dbug on 25 June 2011, 03:06:38

Disconnect your MAF sensor and try it like that.  If its ok you will need a new MAF sensor. ;)