Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Martin_1962 on 30 June 2011, 13:54:48

Title: Fitting headlamp washers
Post by: Martin_1962 on 30 June 2011, 13:54:48

What do I need and how much work?

Just wondering?

THanks

Martin

Title: Re: Fitting headlamp washers
Post by: RobG on 30 June 2011, 13:59:18

Washer jets :D. Headlight washer pump and associated hosing. Need to drill a hole through the blank in your existing bottle to accept pump. Plus the relay. Or you can buy jets, washer bottle with pump and all hosing and relay from me ;D
30 mins to an hour from start to finish. Bumper off, mark & drill holes/slots in bumper for jets, remove washer bottle and replace or drill existing for pump. Connect all hosing and elec. plugs, fit relay in box by battery, re-fill turn lights on and squirt :y

Title: Re: Fitting headlamp washers
Post by: Martin_1962 on 30 June 2011, 16:19:26

How much (including and excluding) the washer bottle?