Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Alex W on 13 July 2011, 13:57:02

Title: Clear fault codes
Post by: Alex W on 13 July 2011, 13:57:02

What is the quickest way to clear/reset fault codes?

Thanks in advance.

Title: Re: Clear fault codes
Post by: Andy B on 13 July 2011, 14:01:29

20 'clean' starts after the fault has been fixed or a code reader.  :y

Title: Re: Clear fault codes
Post by: Alex W on 17 July 2011, 13:07:11

I've now done well over 20 starts since replacing my crank sensor and then forgetting to plug the electrical connector back on the throttle housing but I am still getting Codes 19 and 21.

Is there any other way to force clearance of fault codes?

Title: Re: Clear fault codes
Post by: dbug on 17 July 2011, 15:01:57

Quote

20 'clean' starts after the fault has been fixed or a code reader. :y

As said above ^^^^^ ;)

Title: Re: Clear fault codes
Post by: Alex W on 17 July 2011, 15:53:28

Is that any old cheap code reader from ebay or does it have to be the two grand Vauxhall one?

Title: Re: Clear fault codes
Post by: tango on 17 July 2011, 17:20:59

a cheap code reader of ebay will read and clear most codes
however if you have a android phone you can buy a bluetooth obd module of ebay for about £30 wich does the job uswell