Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: vomega51 on 16 July 2011, 17:22:29

Title: car/spanner light staying on
Post by: vomega51 on 16 July 2011, 17:22:29

hy guys, can anyone help, just fitted a new alternator on my 2.6 omega and the car/spanner light is staying on, carried out a pedal test and came up with
2108
0500 and
2100
can anyone throw any advice in my direction please, thanks

Title: Re: car/spanner light staying on
Post by: sneakypenguin on 16 July 2011, 18:05:50

hi mate, the fault codes are:

0500 : Vehicle speed sensor malfunctionB-009
2100 : CAN-BUS Malfunction
2108 : CAN-BUS no Communication with ABS/TC

I would double check all the leads/cables near the alternator just in case you knocked some without knowing it

Title: Re: car/spanner light staying on
Post by: vomega51 on 16 July 2011, 18:50:39

thanks for the advice, i will check in the morning, watch this space

Title: Re: car/spanner light staying on
Post by: tango on 17 July 2011, 17:18:55

ther is i small black wire wich runs near the tensioner and thee alternator
check if it hasnt been caught in anything

Title: Re: car/spanner light staying on
Post by: vomega51 on 17 July 2011, 19:10:02

thanks tango, will check that out when it stops raining