Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: martin42 on 11 August 2011, 18:52:05

Title: aftermarket alloys
Post by: martin42 on 11 August 2011, 18:52:05

I have a set of 18" x 8 et 40 alloys with 225/40 tyres,will these be ok to fit or will there be any rubbing issues...

Title: Re: aftermarket alloys
Post by: Brikhead on 11 August 2011, 20:20:46

Why not stick 'em on and see?
You could take a few pictures and put them up in the gallery...
http://www.omegaowners.com/forum/YaBB.pl?board=omegagallery

Title: Re: aftermarket alloys
Post by: martin42 on 11 August 2011, 20:27:35

I have to get 2 new tyres fitted to them 1st,they were on my partners ex's omega and have outside edge wear on 2 off them so need replacing when i can afford to

Title: Re: aftermarket alloys
Post by: 2woody on 13 August 2011, 16:14:43

tyres aren't a good size diameter-wise. 830wrpm compared to the Omega size of 817wrpm.

regarding the wheels, must check that the offset and centre bore are ok, as well as the bolting pcd.