Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: moog on 15 August 2011, 20:06:40

Title: EML light
Post by: moog on 15 August 2011, 20:06:40

Hi for a few weeks at times on first start in the morning my omega sounds and runs like its only running on 4 or 5 cylinders. After a couple of mins or a few 100 yrds its fine. However this morning the eml light came on with the same rough running, 2 mins later all is fine and light is out. Started perfect tonight with no light or any other problems. I have a long trip to brixham in it on friday and i'd rather it didn't leave me stranded on the hard shoulder, any ideas anyone? :-/

Title: Re: EML light
Post by: johnnycboy on 15 August 2011, 20:23:46

Pedal trick to see if there are any codes  :question

Title: Re: EML light
Post by: TheBoy on 15 August 2011, 20:25:57

As johnnycboy says, pedal trick it and post up the results (See FAQ/Maintenence Guides on how to do this)

Title: Re: EML light
Post by: moog on 15 August 2011, 20:36:28

10 3 10 10 random misfire.

Title: Re: EML light
Post by: cem_devecioglu on 15 August 2011, 20:55:22

seems ignition related, checking coils and plugs may give an idea..

condition of sparks may say something so you can change the items positions and identify..

Title: Re: EML light
Post by: moog on 15 August 2011, 21:01:42

Thanks all of you. :y

Title: Re: EML light
Post by: TheBoy on 15 August 2011, 21:13:44

Was that the only code? Normally there are others as well with that code :y

Title: Re: EML light
Post by: moog on 16 August 2011, 20:24:15

If i keep going after the 10, 3, 10, 10 it goes 10, 3, 10, 2.

Title: Re: EML light
Post by: Andy B on 16 August 2011, 20:30:10

Quote

If i keep going after the 10, 3, 10, 10 it goes 10, 3, 10, 2.

0302 ......... mis-fire on cylinder 2  :y
Plug? Coil pack?

Title: Re: EML light
Post by: moog on 16 August 2011, 20:35:50

Thanks, :y ordered a set of plugs yesterday so fingers crossed.

Title: Re: EML light
Post by: TheBoy on 16 August 2011, 21:08:52

Quote

If i keep going after the 10, 3, 10, 10 it goes 10, 3, 10, 2.

And what after that?

Title: Re: EML light
Post by: moog on 16 August 2011, 21:23:01

Ill find out tomorrow now. How many times do you have to keep going or does it just stop when its listed all faults?  :-?

Title: Re: EML light
Post by: TheBoy on 16 August 2011, 21:38:43

Quote

Ill find out tomorrow now. How many times do you have to keep going or does it just stop when its listed all faults?  :-?

Each code will flash 3 times, once all codes displayed, it will stop flashing.