Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Martin_1962 on 20 August 2011, 15:36:33
-
W&D and polished the RHS headlamp today.
While checking it over I found the insides loose.
Not the adjuster but the inner side at the top, there is a white thing connected to a rod to the front. The inside part is broken off.
Any easy repair?
Or replacement headlamp time?
-
W&D and polished the RHS headlamp today.
While checking it over I found the insides loose.
Not the adjuster but the inner side at the top, there is a white thing connected to a rod to the front. The inside part is broken off.
Any easy repair?
Or replacement headlamp time?
That`s where the adjuster is Martin :(
-
Manual adjuster not the motor
-
Manual adjuster not the motor
:-? :question
-
One with the metal rod from the front, motor is at other end of the light
-
All part of the adjuster mechanism Martin
-
New lamp then?
-
New lamp then?
have you looked at the adjuster fitting guide? It might give you a pointer before you split your headlight. :y
http://www.omegaowners.com/forum/YaBB.pl?num=1271424451
:y
-
New lamp then?
have you looked at the adjuster fitting guide? It might give you a pointer before you split your headlight. :y
http://www.omegaowners.com/forum/YaBB.pl?num=1271424451
:y
It is the white one on the right its left - black plastic thing is broken on it
-
New lamp then?
have you looked at the adjuster fitting guide? It might give you a pointer before you split your headlight. :y
http://www.omegaowners.com/forum/YaBB.pl?num=1271424451
:y
It is the white one on the right its left - black plastic thing is broken on it
That`s the original fit adjuster
-
New lamp then?
have you looked at the adjuster fitting guide? It might give you a pointer before you split your headlight. :y
http://www.omegaowners.com/forum/YaBB.pl?num=1271424451
:y
It is the white one on the right its left - black plastic thing is broken on it
That`s the original fit adjuster
Main beam hole.
the motor is near the dip
-
And I think it may be part of the reflector
-
And also the top not the bottom
-
Main beam hole, arrowed is the adjuster. This what you mean Martin. That`s the only thing that`ll make the reflector loose.
(http://i190.photobucket.com/albums/z257/belisensis/P1040568.jpg)
-
I'll whip it out tomorrow and take a picture