Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: markspark on 01 September 2011, 00:25:26

Title: glove box removal help
Post by: markspark on 01 September 2011, 00:25:26

Hi guys how do you remove the glove box on a f/l omega ive found some screws but it still wont come out it feels like its still screwed in somewhere

Title: Re: glove box removal help
Post by: mathewst on 01 September 2011, 00:33:28

You have everything in a manual section I believe.

Title: Re: glove box removal help
Post by: Andy B on 01 September 2011, 00:33:36

Quote

Hi guys how do you remove the glove box on a f/l omega ive found some screws but it still wont come out it feels like its still screwed in somewhere

late MFL have the screws shown by Mr Haynes plus an extra fastener on the A post.
HTH

Title: Re: glove box removal help
Post by: mathewst on 01 September 2011, 00:36:23

Think it is in maintenance section topic is glovebox handle replacement.
I used it

Title: Re: glove box removal help
Post by: YZ250 on 01 September 2011, 07:39:55

When you have removed the three torx screws there are a couple of screws under the lower edge of the airbag. When the three torx screws are removed you can lift the airbag slightly
(shown in picture 5 in guide below) to gain access to these screws.Then there's the vent screws as shown in guide.   :y

HTH


http://www.omegaowners.com/forum/YaBB.pl?num=1214169060

Title: Re: glove box removal help
Post by: markspark on 01 September 2011, 23:04:37

Thanks guys  :y :y