Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: bigGmv6 on 19 September 2011, 18:21:55

Title: fitting facelift doors to a preface lift??
Post by: bigGmv6 on 19 September 2011, 18:21:55

Hey, just getting my mv6 ready for MOT.  Afterwards I am planning on changing the doors, can get four really good doors but they are from a face lift, mines is a pre facelift. Thought would be more cost-effective than spraying. Question is, are there any issues with this? Will my door trims fit ok? Any help will be greatly appreciated.

Thanks for now

Title: Re: fitting facelift doors to a preface lift??
Post by: omegod on 19 September 2011, 19:31:42

Doors will fit but the trims are different, if you get the body colour trim off the facelift front wings the car will be updated a treat, back bumper fits too if you can get that.

You will prob need to change the door loom too, bit fiddly but not hard.

Title: Re: fitting facelift doors to a preface lift??
Post by: Andy B on 19 September 2011, 19:40:29

Quote

.....

You will prob need to change the door loom too, bit fiddly but not hard.

you'll definitely have to change the door looms as later cars have electric window switches in the door & not the centre console like earlier cars.  :y :y

Title: Re: fitting facelift doors to a preface lift??
Post by: bigGmv6 on 20 September 2011, 09:48:46

thanks for the replies, think i'll give it a go.  will keep you updated