Omega Owners Forum
		Omega Help Area => Omega General Help => Topic started by: P6UL K on 20 September 2011, 04:52:10
		
			
			- 
				Morning!
 
 Yesterday afternoon when starting the car she started really rough and lumpy but settled after a few seconds but the service (is that what it is?) has light came on.   :-/
 
 Hasn't affected performance or anything, just wondered if the lumpy idle on starting has bought the light on for some reason?  Is it going to be a Tech2 job to find out why its come on?
 
 Cheers  :y
- 
				Spanner light is the engine managment light. Engine-shaped is for emissions control faults.
 
 Read the codes, pedal trick is explained in maintenance guides, as well as are all the fault codes. I suspect you have 0300 and some other 030-codes for misfire due lumpy start. Maybe also 0335 for crank sensor, which might be the origin of poor starting.
- 
				Ok, just been out and done the pedal trick and here's the results...
 
 1 Very brief flash just as all the other lights go out then...
 
 5-2-3
 
 Then nothing, no more flashing - stays off.
 
 Any ideas?
 
 *Edit*
 
 Could this be it?
 
 P1523 Electronic Throttle Control Malfunction
- 
				reckon so ;)
			
- 
				Ah rubbish!  :(
 
 So what does that mean, its knackered and needs replacing?
- 
				Assuming no symptoms, clear it out, see what comes back...
			
- 
				Nah nothing, car seems to run just dandy!
 
 Is there a guide on how to clear the codes also?  :-[
- 
				Nah nothing, car seems to run just dandy!
 
 Is there a guide on how to clear the codes also?  :-[
 Guide for clearing codes...........................code reader ;D ;D :y
- 
				I figured that might be the answer lol...
 
 No one in Kent tho, a right PITA!  :D
- 
				I figured that might be the answer lol...
 
 No one in Kent tho, a right PITA!  :D
 Pick `em up cheap enough........................or you could drive to Bristol :D