Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: JayUK on 10 November 2007, 20:47:32

Title: Head Unit ignition / constant power - how to swap?
Post by: JayUK on 10 November 2007, 20:47:32

I've replaced my previous sony unit with a Blaupunkt HU. Currently it 'forgets' the time and track place when I turn off the ignition - What wires do I need to swap over?

I'm using the autoleads adapter. The Sony unit had a 2 bullet connectors you could just swap over, simple idea but effective!

Anyhoo - Any help to stop my Blaupunkt forgetting? :)

Title: Re: Head Unit ignition / constant power - how to s
Post by: Entwood on 10 November 2007, 20:59:26

Await an expert to confirm this .. but I believe on vauxhalls the permanent live is the wrong way round and 2 wires have to be swapped to enable the memory to be retained.

Give it a while and someone will tell you exactly which 2 wires it is .. :)

Title: Re: Head Unit ignition / constant power - how to s
Post by: TheBoy on 10 November 2007, 23:06:58

Swap permenent 12v and switched 12v

Title: Re: Head Unit ignition / constant power - how to s
Post by: uktigger on 11 November 2007, 00:33:35

usually the red and yellow if i remember correctly

Title: Re: Head Unit ignition / constant power - how to s
Post by: Golfbuddy on 11 November 2007, 00:56:08

Here you go mate. http://www.omegaowners.com/forum/YaBB.pl?num=1185108720

This thread starts off a little obscure but should answer your question.

 :y