Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: JonArgraig on 03 February 2008, 14:57:29

Title: CCR600 in "Safe" mode
Post by: JonArgraig on 03 February 2008, 14:57:29

Afternoon gents,

Ive got a CCR600 in the mega but it shows "Safe" on the display, I was under the impression that it means it's goosed and some one has got the code wrong 10 times...

I have the code it and the CD changer, is it worth doing any thing with it or should I ditch it for some thing newer ?

Title: Re: CCR600 in "Safe" mode
Post by: JonArgraig on 03 February 2008, 15:14:00

Forgot to add, I've tried holding "AS" down for about 15 secs on nothing happend

Title: Re: CCR600 in "Safe" mode
Post by: Dave DND on 03 February 2008, 16:57:36

Check you are turning on the ignition first -

Code Entry as Follows:
Turn Off Stereo
Switch On Ignition (No Need To Start Engine)
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps


If codelocked - leave powered for two hours and try again, and if you need it resetting and decoding, then send it to me via this link

http://ice.dndservices.co.uk/shop_show_item.php/MID/39/ISS/20/IID/3037/PAGE/shop_decode_index.php

 8-)

Title: Re: CCR600 in "Safe" mode
Post by: JonArgraig on 03 February 2008, 17:03:14

Thanks for that, I think its locked though, Ive held the AS button in for a while and nothing happend. well I'll give it go again later and if need be I'll get in the post

Title: Re: CCR600 in "Safe" mode
Post by: TheBoy on 03 February 2008, 17:09:53

Quote

Thanks for that, I think its locked though, Ive held the AS button in for a while and nothing happend. well I'll give it go again later and if need be I'll get in the post

The AS has to be held down whilst the power is switched on, then for about 3s after

Title: Re: CCR600 in "Safe" mode
Post by: JonArgraig on 03 February 2008, 17:15:44

I had held in for a good 20 secs with the ign on, I'm starting to think maybe the head unit is goosed

Title: Re: CCR600 in "Safe" mode
Post by: Dave DND on 03 February 2008, 17:28:38

Nope, just used up all of the code entry attempts

Send it over - no problems at all

Title: Re: CCR600 in "Safe" mode
Post by: JonArgraig on 03 February 2008, 17:34:21

May well send it over,  just toying with moving the DVD player from the mondeo, just its silver (matchs the ford dash) so it might look a tad gash,

Any one had the plesure of fitting screens to the head rests in a mega ? much room to work in them?

Title: Re: CCR600 in "Safe" mode
Post by: JonArgraig on 03 February 2008, 22:17:34

I'm a village idiot...

Cleaned up the contacts on the removable panel, only just noticed it didnt light up...

and now it works fine

You may now begine the mocking

Title: Re: CCR600 in "Safe" mode
Post by: waspy on 03 February 2008, 22:20:49

Quote

I'm a village idiot...

Cleaned up the contacts on the removable panel, only just noticed it didnt light up...

and now it works fine

You may now begine the mocking

Mocking, mocking  :P :P

Title: Re: CCR600 in "Safe" mode
Post by: Dave DND on 03 February 2008, 22:35:24

 :y

Title: Re: CCR600 in "Safe" mode
Post by: TheBoy on 04 February 2008, 10:34:14

Quote

I'm a village idiot...

Cleaned up the contacts on the removable panel, only just noticed it didnt light up...

and now it works fine

You may now begine the mocking

The cheapest fixes are the best :y :y

Now, let the piss-taking begin ;D