Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Marks DTM Calib on 21 February 2008, 12:12:02
-
Available from RS under the following code:
102-361
See here:
http://uk.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=102-361
-
Ordered :y
-
Available from RS under the following code:
102-361
See here:
http://uk.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=102-361
What are these for?
-
The switches in the remote fobs start to fail with age, the extra force required also kills the rubber outer!
-
If I repair mine permanently I'll look at doing them for members
-
If I repair mine permanently I'll look at doing them for members
keep me updated!
-
If I repair mine permanently I'll look at doing them for members
keep me updated!
Tick
-
I am looking at this also to help pay my debts off - won't be rip off but I will need to charge - I'll do mine first then work out prices.
-
Just fitted a set and they work great.....also fit in most later Vx remotes (ie corsa etc)
The rubber on the buttons gets mushroom shaped with use before they start to fail!
-
If I repair mine permanently I'll look at doing them for members
Update me too, please.
-
Available from RS under the following code:
102-361
See here:
http://uk.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=102-361
Will they suit prefacelift as well?
-
Available from RS under the following code:
102-361
See here:
http://uk.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=102-361
Will they suit prefacelift as well?
No, they are a different (and higher quality) type....
-
Available from RS under the following code:
102-361
See here:
http://uk.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=102-361
Will they suit prefacelift as well?
No, they are a different (and higher quality) type....
Which one is the better one?
-
The early switch is better quality but, to big to fit in a three button remote!
Note, the replacements from RS are C&K and not ITT as per the original ones so are actualy better quality anyway (ITT switches are not great but, very cheap)
-
Well I now own quite a few switches so will offer to repair them for members .
I will charge sensible rates as I am broke, but good at soldering.
3 new switches per keyfob with return recorded post will be £7.50 for members with at least 100 posts.
2 Keyfobs same packet would be £12
One member can have them a lot cheaper since I cleaned them before.
New members or non members will be £10.
Please note : postage is not cheap from RS, and it does take about 30 minutes to do properly.
Just send the fob section, and a return address I can sellotape on, in a jiffy bag.
Send it recorded, I use it as they don't tend to disappear then!
PM me for details :y
Now to join some other forums ;D
-
Just repaired mine :y
Brilliant :y