Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: lee4206 on 24 April 2008, 22:01:01

Title: Interior wiring loom
Post by: lee4206 on 24 April 2008, 22:01:01

Does anyone know how easy it is to remove/change the interior loom??.
And would the loom from a 2.5 auto fit a 2.0 manual.
TIA
lee

Title: Re: Interior wiring loom
Post by: Martin_1962 on 25 April 2008, 11:29:04

AFAIK not overly difficult and no it wouldn't fit

Title: Re: Interior wiring loom
Post by: lee4206 on 25 April 2008, 22:29:07

Quote

AFAIK not overly difficult and no it wouldn't fit

Thanks martin  looks like im making one then.
lee

Title: Re: Interior wiring loom
Post by: Martin_1962 on 27 April 2008, 23:11:26

Body loom - whoops - all should be similar in eras - but you will need to strip out the carpets ect

Title: Re: Interior wiring loom
Post by: lee4206 on 27 April 2008, 23:17:41

Quote

Body loom - whoops - all should be similar in eras - but you will need to strip out the carpets ect

Well that sounds promising.  I want to replace the loom that supplies the windows airbags kerb lights and heated seats ect so im asuming the dash has to come out??.

Thanks for the second post its just cheered me up :y.
lee

Title: Re: Interior wiring loom
Post by: TheBoy on 28 April 2008, 09:36:08

body looms vary amongst models/age.

utter pig to replace.  I have a full GLS loom in garage, no idea how Issunaz removed without damaging (he stripped the car

Title: Re: Interior wiring loom
Post by: Martin_1962 on 28 April 2008, 10:15:47

I first misread as engine loom, but when playing with car I found most of the body loom but not under the dash

Title: Re: Interior wiring loom
Post by: TheBoy on 28 April 2008, 19:45:52

Quote

I first misread as engine loom, but when playing with car I found most of the body loom but not under the dash

i suspect you found very little in reality.  there is enough copper to get pikeys in caravans for years in each car ;D