Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: TheBoy on 05 May 2008, 11:52:41
-
I have retro fitted CCRT700 into MV6 by modifying a TM loom.
Got some problems though.
Tuner - first use, constantly scanning for channels. Fine once I've pressed a preset until next time I turn it on.
Phone - no volume control.
General - No SDVC
General - No diagnostics
Any ideas?
-
from experience.
The phone volume only allows adjustment when in a call,(actually connected to the caller not just dialling) using either the rotary or the steering wheel remote.
When you say no SDVC do you mean the option is not there under the extras menu or that it doesn't work.
As for the tuner problem I remember someone quite recently posting the same fault.
Diagnostics - didn't know there were any.
-
from experience.
The phone volume only allows adjustment when in a call,(actually connected to the caller not just dialling) using either the rotary or the steering wheel remote.
When you say no SDVC do you mean the option is not there under the extras menu or that it doesn't work.
As for the tuner problem I remember someone quite recently posting the same fault.
Diagnostics - didn't know there were any.
Yes, in a call, no volume control, either via steering wheel or volume knob.
SDVC - option there, set to 5, but no automatic volume adjustment
i'll do a search for the tuner :)
-
From manual :
During a call.
As soon as you are connected to the called number the set automatically enters the volume menu.
Does yours show the word volume at the bottom of the screen during a call ?
Edit : in the Extras menu what is the call vol set to ? mine is set to +3
-
Does it have 'current presets' EG programmed for the area you are in or is it looking for presets in the area you bought it from ?
-
....
Tuner - first use, constantly scanning for channels. Fine once I've pressed a preset until next time I turn it on. ......
Just leave it till it's finished doing its own thing.
-
I have retro fitted CCRT700 into MV6 by modifying a TM loom.
Got some problems though.
Tuner - first use, constantly scanning for channels. Fine once I've pressed a preset until next time I turn it on.
Phone - no volume control.
General - No SDVC
General - No diagnostics
Any ideas?
The problem is the stereo is an old one, i have a prob with my vol control on the radio its self, doesnt do anything but the steering wheel works ok tho, the tuner sounds like its sticking, try cleaning the tuning button out as much as you can, blast a bit of air in there. thats all from the BBM :y
-
From manual :
During a call.
As soon as you are connected to the called number the set automatically enters the volume menu.
Does yours show the word volume at the bottom of the screen during a call ?
Edit : in the Extras menu what is the call vol set to ? mine is set to +3
Yes, once in call, it defaults to volume, but adjustments make no difference.
-
Does it have 'current presets' EG programmed for the area you are in or is it looking for presets in the area you bought it from ?
local presets. Pressing them produces the expected station, and radio then fine until next time its on.
-
....
Tuner - first use, constantly scanning for channels. Fine once I've pressed a preset until next time I turn it on. ......
Just leave it till it's finished doing its own thing.
it never does.
-
.....
Just leave it till it's finished doing its own thing.
it never does.
That's me out of ideas then. In normal circumstances that's what you do though. I'd be asking Dave DND. ;D ;D ;D
-
I`d be looking towards a dud aerial not providing a strong enough signal for the head unit to register the stations
Try a piece of wire in the rear aerial socket and see if any different?
-
I`d be looking towards a dud aerial not providing a strong enough signal for the head unit to register the stations
Try a piece of wire in the rear aerial socket and see if any different?
Not keen on taking out again, unless absolutely necessary - its a bugger to get in.
FM stations normally borderline in my area are coming through remarkable clear, which leaves me thinking the aerial is OK? All presets programmed in are very clear as well :-/
-
Hmmm. . . . . Stumped !
The tuner usually searches when first switched on to update the pty and RDS information for the stations stored.
If FM is good, and all memory feeds are connected, I`d be inclined to run it for a week or so and then see what it is like after that - could be an eronous bit of data not yet loaded ?
-
Just had a thought, do you have traffic switched on and does your usual radio station provide EON information ? If not the unit could be searching for a station providing EON/Traffic info ?
-
this new estate i have got does the same everytime you switch the radio on !!! very annoying >:(
-
Just had a thought, do you have traffic switched on and does your usual radio station provide EON information ? If not the unit could be searching for a station providing EON/Traffic info ?
traffic off, had wondered same myself...
-
this new estate i have got does the same everytime you switch the radio on !!! very annoying >:(
Out of interest, is phone volume non operable?
-
Have you reset it to factory defaults yet ?
Power on holding the clear button ?
If not, I would
-
Have you reset it to factory defaults yet ?
Power on holding the clear button ?
If not, I would
That my mission when I go out shortly, along with resetting engine learn values....
-
Have you reset it to factory defaults yet ?
Power on holding the clear button ?
If not, I would
That my mission when I go out shortly, along with resetting engine learn values....
Best reset the Climate panel and all your keys and the sunroof as well
You never know you might actually get lucky.
I'm sorry I can't be of any help :(
-
this new estate i have got does the same everytime you switch the radio on !!! very annoying >:(
Out of interest, is phone volume non operable?
dont know jaime havnt had a sim card in it yet !! :-/
-
Have you got the latest software on it?
-
Have you got the latest software on it?
You can't just fling a comment like that up and then sit back and wait for the responses to come flooding in, that's just naughty!
You can upgrade the software ? How ? what benifits ? Where ? Who ? When ? etc etc
-
Have you got the latest software on it?
You can't just fling a comment like that up and then sit back and wait for the responses to come flooding in, that's just naughty!
You can upgrade the software ? How ? what benifits ? Where ? Who ? When ? etc etc
Via Tech2, I seem to recall there being a fair few updates on the CCRT700 when I did mine.
-
.....
Via Tech2, I seem to recall there being a fair few updates on the CCRT700 when I did mine.
As Jules says ...... like what? free calls? ;) voice recogition? ;)
Are any of the' upgrades' of any actual benefit?
-
.....
Via Tech2, I seem to recall there being a fair few updates on the CCRT700 when I did mine.
As Jules says ...... like what? free calls? ;) voice recogition? ;)
Are any of the' upgrades' of any actual benefit?
any upgrades are a benefit fella !! :y
-
this new estate i have got does the same everytime you switch the radio on !!! very annoying >:(
Out of interest, is phone volume non operable?
dont know jaime havnt had a sim card in it yet !! :-/
right jaime tried it this afternoon and yes i can alter the volume whilst in a call :y
-
.....
Via Tech2, I seem to recall there being a fair few updates on the CCRT700 when I did mine.
As Jules says ...... like what? free calls? ;) voice recogition? ;)
Are any of the' upgrades' of any actual benefit?
There are a couple of things to consider about any software update.
1) Software resource and testing costs serious money
2) Because of 1), companies dont do software updates just for the hell of it! :y
-
..... companies dont do software updates just for the hell of it! :y
OK ;) ...... Put another way ... Am I missing out on anything significant by not having the upgrade on my CCRT700? What are the upgrades upgrading? ;)
-
Have you got the latest software on it?
No idea. If you recall from initial post, I cannot connect tech2 :(
-
Take the Mrs to the in-Laws this weekend.... bring it round here and plug it in to mine... see if it's any different.... and maybe see if you can access it then..... ???
(I don't know for sure yet if I'll have time to, or even if i'd be "allowed" to wander over for a few hours... depends on Chrissy's plans... but if i'm here , she can't complain about you popping round to try it.... ;) devious lateral problem solving ! )
-
Take the Mrs to the in-Laws this weekend.... bring it round here and plug it in to mine... see if it's any different.... and maybe see if you can access it then..... ???
(I don't know for sure yet if I'll have time to, or even if i'd be "allowed" to wander over for a few hours... depends on Chrissy's plans... but if i'm here , she can't complain about you popping round to try it.... ;) devious lateral problem solving ! )
Outlaws in Cornwall, she's in Great Missenden, and I'm in Bruge. Think that plan may fall flat ;D
-
whoops.... i forgot,... you did say down the pub....
ahh well.... I'm in London all next week, but the weekend after might be okay.... I could probably pop round to to yours that weekend.
-
My retro fit worked well!
The KW82 chanel does the tech 2 diags doesnt it?
the only thing my ccrt cant do is the SDVC which i always turn off anyway!
-
My retro fit worked well!
The KW82 chanel does the tech 2 diags doesnt it?
the only thing my ccrt cant do is the SDVC which i always turn off anyway!
Yes, thats the diag line.
I would have thought it would get its speed signal from display via CAN, but this appears not to be the case :(
-
when wiring my stereo i went to the scrappy and found where all the wires went on an elite the 3rd canbus fo sdvc i think qwent off towards the kick panel
there is a sat nav speed sensor isnt there is that can bus?
did you manage to sort your cdc out? i can provide pics etc if needed!
-
when wiring my stereo i went to the scrappy and found where all the wires went on an elite the 3rd canbus fo sdvc i think qwent off towards the kick panel
there is a sat nav speed sensor isnt there is that can bus?
did you manage to sort your cdc out? i can provide pics etc if needed!
CDC is fine.
I'm intrigued by this speed sensor....
-
my local vx dealer wouldnt tell me :@
-
yeah, sat nav control is supposed to go inactive once you pass 100km/h
(safety feature)
certainly did on my old one...
no idea about this one yet... haven't tried to enter an address while moving.
-
yeah, sat nav control is supposed to go inactive once you pass 100km/h
(safety feature)
certainly did on my old one...
no idea about this one yet... haven't tried to enter an address while moving.
My Carin prevents entering destinations above 70ish...