Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Mr Skrunts on 17 May 2008, 13:39:19
-
Having reset my electric windows after having a flat battery, and a recent post on restting the climate.
Then what other things are resettable on the Miggy.
Also are there any other hints or tips we might not know about with the Migs.
TIA. :y
-
Having reset my electric windows after having a flat battery, and a recent post on restting the climate.
Then what other things are resettable on the Miggy.
Also are there any other hints or tips we might not know about with the Migs.
TIA. :y
Sunroof if fitted, and obviously radio code.
-
How do you reset the sunroof?
TIA :y
-
With the sunroof in the closed position push the control upwards for about 10 seconds. The tilt the sunroof fully and turn the control to the fully tilted position and hold it up for about 10 seconds then do the same for the fully open position ;)
-
Memory seats.
-
Yes please, seats as well.
TIA
-
Get seats and all mirrors to correct position then press & hold in one of the memory buttons on the seat for a few seconds.
-
Get seats and all mirrors to correct position then press & hold in one of the memory buttons on the seat for a few seconds.
So what is the "M" button for?
-
hold the m button and either 1 2 or 3 all set
-
M +1 for 10 seconds to set seat and all 3 mirrors to current possition if I have read you both correctly. :y
M +2 for 10 seconds
M +3 for 10 seconds
and then just press 1, 2 or 3 to return to a pre set position.?
:y :y
-
Dont you need the drivers door open to set them or am I having a blond moment ::)
-
Dont you need the drivers door open to set them or am I having a blond moment ::)
Definitely blonde .... :)
(Its damned difficult to set the mirrors with the doors open !!! )
-
M +1 for 10 seconds to set seat and all 3 mirrors to current possition if I have read you both correctly. :y
M +2 for 10 seconds
M +3 for 10 seconds
and then just press 1, 2 or 3 to return to a pre set position.?
:y :y
No, just press M & 1 to store current settings in pos 1
to restore those settings press and hold 1 until everything stops moving
-
Cheers :y :y