Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: MV6Man on 06 July 2008, 13:59:24
-
My CC temp displays shows -- in both displays when i turn ignition off.
It started when i changed those bulbs behind and removed those connectors. Left one connector was a bit loose at first try so i plugged it in correctly.
I presume that it needīs to take to Tech2 to get that fault code out?
I did take battery ground off for 30 minutes, but no difference.
Everything seems to be working ok..
-
myn did that, shortly followed by, no aircon gas! Did i see something in the manual about cc fault with that symbol? myn only did it after turning off ignition,same as yours, for about 10 secs iirc.
-
myn did that, shortly followed by, no aircon gas! Did i see something in the manual about cc fault with that symbol? myn only did it after turning off ignition,same as yours, for about 10 secs iirc.
Yes I remember reading up for my original 1996 Elite that if the displays showed "--" after turning off ignition it mean't there was a fault with the system. :'(
-
aye, fault code stored.
-
Alrighty then, is there a way to clear those codes or is a trip to tech2?
-
Alrighty then, is there a way to clear those codes or is a trip to tech2?
if you have a laptop with proper com port, cheap tech2 should read it...
-
Yea i have laptop, this could be a good reason to buy opel-scanner...