Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: mark3 on 19 July 2008, 17:33:19
-
Not locking! sometimes it tries, i find the button half down!
anyways had the door trim off and removed the connector plug from motor/power unit and had 10/11 volt present at 2 out of 3 pins when locking it, and again 10/11 volt present at a different 2 out of 3 pins when un locking it....i assume its a defective motor/power unit? looks like its all part of the lock mechanism as well?
whats your thoughts?
Thanx in advance!!
-
servo is seperate motor, black oblong unit. Sounds like its failed (assuming locking/unlocking manually is not stiff)
-
servo is seperate motor, black oblong unit. Sounds like its failed (assuming locking/unlocking manually is not stiff)
i had a look inside and can clearly see the servo unit, linkages go to and throw really easy and i have some voltage at pins in connector when locked/unlocked so i guess it is the servo BUT i see no way of removing the servo alone, looks like the whole lock assebly needs to be removed then strip servo from it off the vehicle!!!
does this seem right? i reckon so but not took one out before! well not on an omega!
-
myn does this and ive learnt to live with it!
i find it works ok if the car is parked in the sun!
-
myn does this and ive learnt to live with it!
i find it works ok if the car is parked in the sun!
its only been buggered for 4 days and its driving me mad all ready!!