Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Jim on 11 September 2008, 16:21:28

Title: Facelift Omega, Reverse Sensors Control Box
Post by: Jim on 11 September 2008, 16:21:28
Can any one tell me if all facelift elite's have the loom fitted for the vauxhall reverse sensors.

The reason I'm asking is that I have an irmscher rear bumper which has the vauxhall reverse sensors already fitted with loom and plug so I was wondering if I could just plug and play.
Title: Re: Facelift Omega, Reverse Sensors Control Box
Post by: Marks DTM Calib on 11 September 2008, 17:23:31
Nope, none of them had any loom connection as standard,

The setup has a seperate control  module that attaches to the ctructual section just forward of he spare wheel in a saloon, without this its pretty useless!
Title: Re: Facelift Omega, Reverse Sensors Control Box
Post by: Jim on 11 September 2008, 18:28:55
Quote
Nope, none of them had any loom connection as standard,

The setup has a seperate control  module that attaches to the ctructual section just forward of he spare wheel in a saloon, without this its pretty useless!
Cheers Mark,

I'II see if I can get one from the scrappie
Title: Re: Facelift Omega, Reverse Sensors Control Box
Post by: TheBoy on 11 September 2008, 18:42:28
Its called Park Pilot IIRC, and made by Bosch
Title: Re: Facelift Omega, Reverse Sensors Control Box
Post by: Jim on 11 September 2008, 18:45:33
Quote
Its called Park Pilot IIRC, and made by Bosch
Cheers Jamie :y
Title: Re: Facelift Omega, Reverse Sensors Control Box
Post by: Dazzler on 11 September 2008, 19:34:21
http://www.carpartsconnexion.com/vauxhall/partdetail.asp?dp=26244&f=Vauxhall&q=parking&m=OMEGA&y=Any+year&cat=0&

Found this Jim, not sure if its what your after :-/
Title: Re: Facelift Omega, Reverse Sensors Control Box
Post by: Marks DTM Calib on 11 September 2008, 19:42:02
And the same unit is fitted to Vx's across the range....
Title: Re: Facelift Omega, Reverse Sensors Control Box
Post by: Jim on 11 September 2008, 20:13:42
Quote
http://www.carpartsconnexion.com/vauxhall/partdetail.asp?dp=26244&f=Vauxhall&q=parking&m=OMEGA&y=Any+year&cat=0&

Found this Jim, not sure if its what your after :-/
I think thats it :y
Title: Re: Facelift Omega, Reverse Sensors Control Box
Post by: TheBoy on 11 September 2008, 20:28:28
Quote
And the same unit is fitted to Vx's across the range....
Do you know if any cars had the loom in place?  Haven't looked at wiring diags, is it a simple 0v and reverse feed, like the cheapo kits?
Title: Re: Facelift Omega, Reverse Sensors Control Box
Post by: NickA on 12 September 2008, 21:23:29
Quote
Quote
And the same unit is fitted to Vx's across the range....
Do you know if any cars had the loom in place?  Haven't looked at wiring diags, is it a simple 0v and reverse feed, like the cheapo kits?
for the Omega it's just +12 and 0v I fitted a genuine Vaux one to mine stripped from a scrapped Elite. It was simply spliced into the reverse lamp feed and earthed. Loom comes with the unit. Only thing preinstalled is the mounting holes for the control box