Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Welung666 on 03 October 2008, 13:06:00

Title: CCRT700 & 6 disc changer question.
Post by: Welung666 on 03 October 2008, 13:06:00

I've been offered a CCRT700 and 6 disc Blaukpunt changer to replace the Sony POS thats fitted in my car. But they don't have the cable! Are they available from anywhere?

Lee.

Title: Re: CCRT700 & 6 disc changer question.
Post by: MutantCav on 03 October 2008, 13:08:01

Will be available second hand but dont suppose they are easy to get hold of...but I could be wrong as I have never tried looking lol

I have a CCR800 Bose set up with loom if you go for that instead...

Title: Re: CCRT700 & 6 disc changer question.
Post by: TheBoy on 03 October 2008, 13:30:32

Quote

I've been offered a CCRT700 and 6 disc Blaukpunt changer to replace the Sony POS thats fitted in my car. But they don't have the cable! Are they available from anywhere?

Lee.

Oh that will be a horrible job to retro fit that to a pre minifaclift.

Title: Re: CCRT700 & 6 disc changer question.
Post by: TheBoy on 03 October 2008, 13:32:12

Quote

Will be available second hand but dont suppose they are easy to get hold of...but I could be wrong as I have never tried looking lol

I have a CCR800 Bose set up with loom if you go for that instead...

Its a standard connector at radio end - ISO 36 way.


Retro fitting ccr800 will be easier, ccr800 should work with older 8 digit display.

Title: Re: CCRT700 & 6 disc changer question.
Post by: tmx on 03 October 2008, 14:53:34

CCRT 700 in non CCRT700 car simple answer dont bother lots of hard work it will never work properly and is best avoided CCR800 as already sugested is my advice

Title: Re: CCRT700 & 6 disc changer question.
Post by: TheBoy on 03 October 2008, 15:09:50

Quote

CCRT 700 in non CCRT700 car simple answer dont bother lots of hard work it will never work properly and is best avoided CCR800 as already sugested is my advice

The one bit I couldn't get to work was speed dependent volume...  ...but a bit of a sod.

I am tempted to put ccrt700 that I had in MV6 into the tractor if I can get a new CCRT700 display (doesn't matter if its broken - I only need the plastic casing, as I used mine for something else ::)

Title: Re: CCRT700 & 6 disc changer question.
Post by: tmx on 03 October 2008, 15:19:43

new display eh PM coming your way