Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Recovery_Russ on 27 September 2008, 17:56:19

Title: What wiring?
Post by: Recovery_Russ on 27 September 2008, 17:56:19
Under my current non rear blind shelf i have a small plug taped up at the left hand side which i assume is for the blind when i fit it, but on the right hand side i have another plug and an aerial type co-ax cable. What are these for? My radio is a ccrt700 with phone and have good signal both phone and radio so i'm assuming its for something else. But what?
Title: Re: What wiring?
Post by: TheBoy on 27 September 2008, 21:00:44
Grey one by any chance?
Title: Re: What wiring?
Post by: Recovery_Russ on 28 September 2008, 11:20:34
Yeah with a screw fit type connector
Title: Re: What wiring?
Post by: TheBoy on 28 September 2008, 11:28:15
Quote
Yeah with a screw fit type connector
My loom has that, no idea what for.  End up in Bose shelf...
Title: Re: What wiring?
Post by: TheBoy on 28 September 2008, 12:14:39
Think it may be something to do with GPS unit fitted to some CCRT700 radios.
Title: Re: What wiring?
Post by: alexandjen on 05 October 2008, 15:08:07
So will a blind from an Elite fit straight into a CDX parcel shelf?
Title: Re: What wiring?
Post by: RobG on 05 October 2008, 15:17:12
Quote
So will a blind from an Elite fit straight into a CDX parcel shelf?
Blind will go but underside of shelf needs to be butchered a bit to allow clearance for motor. Then you have to sort out how to fit blind to shelf as on "ready cut" shelf there are six screw studs fitted to allow blind to be bolted on. IMHO you`re better off trying to source another shelf
Title: Re: What wiring?
Post by: alexandjen on 05 October 2008, 15:29:51
Quote
Quote
So will a blind from an Elite fit straight into a CDX parcel shelf?
Blind will go but underside of shelf needs to be butchered a bit to allow clearance for motor. Then you have to sort out how to fit blind to shelf as on "ready cut" shelf there are six screw studs fitted to allow blind to be bolted on. IMHO you`re better off trying to source another shelf

Thanks Rob, I'll look around for a blind fitted to a shelf then ::)
Title: Re: What wiring?
Post by: RobG on 05 October 2008, 15:40:15
Quote
Quote
Quote
So will a blind from an Elite fit straight into a CDX parcel shelf?
Blind will go but underside of shelf needs to be butchered a bit to allow clearance for motor. Then you have to sort out how to fit blind to shelf as on "ready cut" shelf there are six screw studs fitted to allow blind to be bolted on. IMHO you`re better off trying to source another shelf

Thanks Rob, I'll look around for a blind fitted to a shelf then ::)
Blind switch for the console is just under £12 from main dealers
Title: Re: What wiring?
Post by: alexandjen on 05 October 2008, 16:08:57
Quote
Quote
Quote
Quote
So will a blind from an Elite fit straight into a CDX parcel shelf?
Blind will go but underside of shelf needs to be butchered a bit to allow clearance for motor. Then you have to sort out how to fit blind to shelf as on "ready cut" shelf there are six screw studs fitted to allow blind to be bolted on. IMHO you`re better off trying to source another shelf

Thanks Rob, I'll look around for a blind fitted to a shelf then ::)
Blind switch for the console is just under £12 from main dealers

Thanks again Rob, don't know anyone who has got a shelf complete with blind for sale do you?
Title: Re: What wiring?
Post by: RobG on 05 October 2008, 16:33:55
No mate, sorry. I got a blind but no shelf :)
Title: Re: What wiring?
Post by: RobG on 05 October 2008, 16:38:44
Quote
Quote
Quote
Quote
Quote
So will a blind from an Elite fit straight into a CDX parcel shelf?
Blind will go but underside of shelf needs to be butchered a bit to allow clearance for motor. Then you have to sort out how to fit blind to shelf as on "ready cut" shelf there are six screw studs fitted to allow blind to be bolted on. IMHO you`re better off trying to source another shelf

Thanks Rob, I'll look around for a blind fitted to a shelf then ::)
Blind switch for the console is just under £12 from main dealers

Thanks again Rob, don't know anyone who has got a shelf complete with blind for sale do you?
Fleabay item no; 110292917348. Not a bad price :y
Title: Re: What wiring?
Post by: Bumbazor on 05 October 2008, 19:58:14
That guy's got lots of other good stuff too. Worth watching.
Title: Re: What wiring?
Post by: alexandjen on 05 October 2008, 22:16:37
Quote
Quote
Quote
Quote
Quote
Quote
So will a blind from an Elite fit straight into a CDX parcel shelf?
Blind will go but underside of shelf needs to be butchered a bit to allow clearance for motor. Then you have to sort out how to fit blind to shelf as on "ready cut" shelf there are six screw studs fitted to allow blind to be bolted on. IMHO you`re better off trying to source another shelf

Thanks Rob, I'll look around for a blind fitted to a shelf then ::)
Blind switch for the console is just under £12 from main dealers

Thanks again Rob, don't know anyone who has got a shelf complete with blind for sale do you?
Fleabay item no; 110292917348. Not a bad price :y

Thanks yet again Rob, will a prefacelift shelf fit in a facelift?
Title: Re: What wiring?
Post by: RobG on 05 October 2008, 22:25:09
Quote
Quote
Quote
Quote
Quote
Quote
Quote
So will a blind from an Elite fit straight into a CDX parcel shelf?
Blind will go but underside of shelf needs to be butchered a bit to allow clearance for motor. Then you have to sort out how to fit blind to shelf as on "ready cut" shelf there are six screw studs fitted to allow blind to be bolted on. IMHO you`re better off trying to source another shelf

Thanks Rob, I'll look around for a blind fitted to a shelf then ::)
Blind switch for the console is just under £12 from main dealers

Thanks again Rob, don't know anyone who has got a shelf complete with blind for sale do you?
Fleabay item no; 110292917348. Not a bad price :y

Thanks yet again Rob, will a prefacelift shelf fit in a facelift?[/quote]
Parcel shelf will fit entire range :y
Title: Re: What wiring?
Post by: alexandjen on 05 October 2008, 22:26:25
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
So will a blind from an Elite fit straight into a CDX parcel shelf?
Blind will go but underside of shelf needs to be butchered a bit to allow clearance for motor. Then you have to sort out how to fit blind to shelf as on "ready cut" shelf there are six screw studs fitted to allow blind to be bolted on. IMHO you`re better off trying to source another shelf

Thanks Rob, I'll look around for a blind fitted to a shelf then ::)
Blind switch for the console is just under £12 from main dealers

Thanks again Rob, don't know anyone who has got a shelf complete with blind for sale do you?
Fleabay item no; 110292917348. Not a bad price :y

Thanks yet again Rob, will a prefacelift shelf fit in a facelift?[/quote]
Parcel shelf will fit entire range :y

Excellent cheers :y
Title: Re: What wiring?
Post by: alexandjen on 05 October 2008, 22:37:59
Is the switch the same across the range also?
Title: Re: What wiring?
Post by: RobG on 05 October 2008, 22:53:35
Quote
Is the switch the same across the range also?
No. Facelift totally different to others. :)
Title: Re: What wiring?
Post by: RobG on 05 October 2008, 22:54:49
Facelift switch sits under hazard switch :)
Title: Re: What wiring?
Post by: alexandjen on 05 October 2008, 23:06:11
Quote
Facelift switch sits under hazard switch :)

 :y Thanks :y
Title: Re: What wiring?
Post by: RobG on 05 October 2008, 23:07:42
Quote
Quote
Facelift switch sits under hazard switch :)

 :y Thanks :y
When I got my switch had to pay for it up front and wait two days. Not a stock item :)
Title: Re: What wiring?
Post by: alexandjen on 05 October 2008, 23:08:23
Quote
Quote
Quote
Facelift switch sits under hazard switch :)

 :y Thanks :y
When I got my switch had to pay for it up front and wait two days. Not a stock item :)

Is it on trade club?
Title: Re: What wiring?
Post by: RobG on 05 October 2008, 23:21:29
No :)
Title: Re: What wiring?
Post by: alexandjen on 05 October 2008, 23:26:37
Quote
No :)

Ok cheers Rob :y