Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Cumbria on 22 October 2008, 17:41:20

Title: Fitting bose system
Post by: Cumbria on 22 October 2008, 17:41:20

Just had a look behind drivers kick panel for conector for bose loom ready for when bose set up arrives. Cant find it thought it would of been the same as the sat nav loom just plug in. Or doesnt the CDX have loom in place. Or am i looking in wrong place. Thanks.

Title: Re: Fitting bose system
Post by: markey mark on 22 October 2008, 17:55:50

drivers kick panel grey plug about 4" long around the central locking ecu two 10mm plastic nuts hold it in place  :y

Title: Re: Fitting bose system
Post by: Cumbria on 22 October 2008, 18:01:01

Cheers will have a look tomorrow was looking for a plug hanging loose. Probably over looked it

Title: Re: Fitting bose system
Post by: Cumbria on 27 October 2008, 16:50:53

Do i just remove the grey plug & bolt the bose one in its place.

Title: Re: Fitting bose system
Post by: Marks DTM Calib on 27 October 2008, 19:28:23

Quote

Do i just remove the grey plug & bolt the bose one in its place.

yes

Title: Re: Fitting bose system
Post by: Cumbria on 27 October 2008, 19:38:28

Will that still work the CD changer ok. Thought it would of been connected up to other loom. Dont no what bose loom operates though apart from amp & rear speakers. Do door speakers operate off the plugs on top of the grey plug. Thanks.

Title: Re: Fitting bose system
Post by: TheBoy on 27 October 2008, 19:44:02

Quote

Will that still work the CD changer ok. Thought it would of been connected up to other loom. Dont no what bose loom operates though apart from amp & rear speakers. Do door speakers operate off the plugs on top of the grey plug. Thanks.

bose loom includes cd loom.

door speakers are rerouted to amp, and then back again to kick panel by bose loom

Title: Re: Fitting bose system
Post by: Cumbria on 27 October 2008, 19:49:46

Thanks for replies. At least i know where i am working now.