Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: dave-b on 28 October 2008, 19:20:11

Title: Air bag light
Post by: dave-b on 28 October 2008, 19:20:11
Hi to all, new to this forum & I've a question already!
I'm about to aquire a '01 3.0 elite from a mate, but it has an airbag fault light that wont reset with Tech2. The fault comes up as 'child seat sensor' on the front passenger seat. Does anyone know if
a) the sensor is unplugged, will the light reset?
b) which is the plug (there are about six under there !)
c) is there any other way, other than replacing the sensor pad.          
    (app. £300 from Vx !)
Title: Re: Air bag light
Post by: TheBoy on 28 October 2008, 19:27:41
Not sure, as quite a rare option.

Wonder if MDTM or Kevin Wood can check their facelifts and see if its a variant code in SRS ECU?
Title: Re: Air bag light
Post by: Marks DTM Calib on 28 October 2008, 19:42:10
It is a configurable option..........once only at first install!
Title: Re: Air bag light
Post by: TheBoy on 28 October 2008, 19:47:31
Quote
It is a configurable option..........once only at first install!
Like the side bags then?
Title: Re: Air bag light
Post by: Marks DTM Calib on 28 October 2008, 19:52:12
Quote
Quote
It is a configurable option..........once only at first install!
Like the side bags then?

Yep!
Title: Re: Air bag light
Post by: Marks DTM Calib on 28 October 2008, 19:55:35
Looks like a piece of piss to bypass....its either a tie high or low job.
Title: Re: Air bag light
Post by: dave-b on 28 October 2008, 20:33:21
Quote
Looks like a piece of piss to bypass....its either a tie high or low job.
I was hoping there would be a way around this............ would you care to elaborate !  
Title: Re: Air bag light
Post by: Marks DTM Calib on 28 October 2008, 21:10:08
Pin 39 on the airbag ECU needs connecting to either 12V or 0V(chassis), I would guess at 0V!