Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: bighed on 02 January 2009, 08:59:15
-
Have got a bulb out on one of my fog lights. What bulbs do they take and how do they come off to change bulbs :-/
-
Bulbs are H1 and are fitted from behind, I jack up the front and slide under. Easy 5 min job :y
-
Thanks Wellung!! :y
-
[movedhere] Omega General Help [move by] hotel21.
-
I find it far easier to remove the 3 torx screws for the plastic grille beside the fog, then remove the only screw holding the fog lamp in its mounting, lets you get the dust cap off easily and change the bulb.
cheers
-
I find it far easier to remove the 3 torx screws for the plastic grille beside the fog, then remove the only screw holding the fog lamp in its mounting, lets you get the dust cap off easily and change the bulb.
cheers
Not all bumpers allow you to use that method - but great if you can :y
-
hi
as already said, take the black plastic air vent off then unscrew lens, take care as the the screw may be corroded, good old wd40, same blub H 1 as main beam, if filled with water dry out with hot air gun take care ;)
-
Handy to know as one of my headlight bulbs has gone and I have dozens of foglights sitting around, saves me paying out lol
-
H3 fitment on facelift. Aren't preface the same???
-
H3 fitment on facelift. Aren't preface the same???
na the headlights and fogs are H1 main beams H7 on the prefacelift and i dont know about the fog lights on the facelift
-
It should be HB4 for the facelifted.
-
thanks!
hope they're called HB4's over here
-
thanks!
hope they're called HB4's over here
Yep they are.
Full Omega bulb details are here:
http://www.omegaowners.com/forum/YaBB.pl?num=1175644431/0#0
-
does have a pic of the HB4's mark :P
-
does have a pic of the HB4's mark :P
Moan moan moan..... ;D
But fixed!