Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: alexandjen on 15 July 2009, 21:51:32

Title: Flashing LED on key fob
Post by: alexandjen on 15 July 2009, 21:51:32
Just tried the pedal trick on my 2.2 and it seems it does work on some models :o

Took the key out of the ignition and the led on the fob was flashing  :-?

It won't lock on the remote anymore, have to use the key in the lock ::)

After about 30 seconds the led stops flashing, tried the remote again and it unlocked the doors but started flashing again. Then it won't lock remotely.

Has the key un-synced? or something else :-/

Edit: Quick update, tried new battery, no change.

Boot release not working, unlock button seems to lock the doors as well :-?

Tried the sync process - no change :(

Any ideas guys?
Title: Re: Flashing LED on key fob
Post by: Martin_1962 on 16 July 2009, 18:06:47
Buttons are knackered, needs new switches by the sound of it

Title: Re: Flashing LED on key fob
Post by: alexandjen on 16 July 2009, 18:11:16
PM sent Martin
Title: Re: Flashing LED on key fob
Post by: Martin_1962 on 16 July 2009, 22:36:43
The rubber case buttons have gone hard and are holding the switches down.

As per PM - remove and clean - hot water will help to flex it back into shape - if there is a thin bit of rubber by it try removing it
Title: Re: Flashing LED on key fob
Post by: alexandjen on 16 July 2009, 22:41:45
Thanks for that Martin, I gave that a try and it was fine for 2 or 3 presses then it was back to how it was.

I've ordered a new case, so should be fine once it's swapped over :y
Title: Re: Flashing LED on key fob
Post by: Martin_1962 on 16 July 2009, 23:22:08
Quote
Thanks for that Martin, I gave that a try and it was fine for 2 or 3 presses then it was back to how it was.

I've ordered a new case, so should be fine once it's swapped over :y

WHere are you getting the case from if you don't mind saying?
Title: Re: Flashing LED on key fob
Post by: alexandjen on 16 July 2009, 23:25:05
Fleabay ::)